You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

I-TRO-TA400

TA400 Pitot Tube Anemometer incl. Cal. Certificate Trotec

New product


$ 0.00

The cross-sections of the air ducts to be measured – whether round or square – can be entered into the device in a differentiated way.

Being a dynamic pressure anemometer with Pitot tube, the TA400 also allows you to determine the differential and dynamic pressure. The Pitot tube fulfils all requirements, particularly for high flow rates and dusty air, since it has virtually no mechanical or dirt-sensitive sensors – hence, it is perfectly suited even for application in extremely rough surroundings.

In addition to air current control in ventilation ducts and other typical measuring tasks in the area of air conditioning and ventilation, the TA400 also covers additional fields of application thanks to its capability of measuring pressure. These fields include filter status measurements in air conditioning systems and differential pressure measurements in gas-fired boilers.

Moreover, this differential pressure measuring device is also optimally suited for pressure control in sealed-off zones with high or low pressure atmospheres, for example during restoration work in areas contaminated by mould.

Since the TA400 additionally comes with an internal memory administration, you are able to store the measured pressure, flow rate and volumetric flow data in the TA400 anytime during a measurement separately in up to 99 data sets, or call up or delete stored values.

Practical benefits:

  • Professional anemometer for measuring air velocity, air volume flow, air pressure and air temperature
  • Differential and dynamic pressure measurement with pitot tube
  • Large, easily legible display with background illumination and dual indication of measured values
  • Min/Max/AVG/REC and data hold function
  • Zero reset function for measuring precise pressure differences in relation to a reference environment
  • Internal memory for up to 99 measured values
  • USB port and software for real-time measurement series recording
  • Live Log function with connected PC
  • Including calibration certificate



Technical details:

AIr flow velocity:

  • Measuring range: 1 - 80 m/s; 3,6- 288 km/h; 200 - 15.733 ft/min; 2,24 - 178,66 mph; 2 - 154,6 kn
  • Accuracy: ± 2,5% at 10 m/s
  • Resolution: 0,01 m/s; 0,1 km/h; 1 ft/min; 0,1 mph; 0,1 kn



Air/ gas pressure:

  • Measuring range: 0 - 5.000 Pa
  • Accuracy: ± 0,3 % bei +25 °C
  • Resolution: 1 Pa
  • Measuring units: PA, mbar, psi, inH₂O, mmH₂O



Air temperature:

  • Measuring range: 0 up to + 50 °C (32 up to 122 °F)
  • Accuracy: ± 1 °C (± 2 °F)
  • Resolution: 0,1 °C (0,1 °F)



Volume flow:

  • Mesuring range: 0,001 - 99,999 m³/min (CMM) ; 0,001 - 99.999 ft³/min
  • Accuracy: ± 0,3 % of the measured value



Other:

  • Type: dynamic pressure probe
  • Type of construction: Pitot tube in L-form
  • Length: 335 mm
  • Ø Probe tip: 8 mm
  • Hose length: 850 mm
  • Storable measured values: 99
  • Operating conditions: 0 °C up to +50 °C, < 90% r.F.
  • Dimensions: 210 x 70 x 50 mm
  • Weight: 540 g (incl. Battery & Probe)
  • Power supply: 9 V IEC 6LR61
  • Scope of delivery: Measuring device with instructions, calibration certificate, batteries, USB cable, software, hard top case, pitot tube, 2x silicone connection hoses (length 850 mm)

Reviews

Write a review

TA400 Pitot Tube Anemometer incl. Cal. Certificate Trotec

TA400 Pitot Tube Anemometer incl. Cal. Certificate Trotec

With the TA400, you cannot only measure even extremely high air velocities up to 80 m/s, but equally also the ambient temperature and air volume flow.

Questions (0)

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Path: > > > > TA400 Pitot Tube Anemometer incl. Cal. Certificate Trotec

30 other products in the same category: