The Spectra Precision DG613G Pipe Laser is built for efficiency, accuracy and reliability when laying pipes.
The length of the DG613G has been reduced to make it easier to set up the lasers into tight inverts in the manhole. The DG613G has a grade range from -12% to +40% and is fully self-leveling over the entire grade range. Even the cross axis is fully compensated - providing quick set up and peace of mind that the laser will be level without having to adjust at the bottom of the invert.
The DG613G works over a distance of 150m (500ft) providing full operation in a single set-up between manholes. The new RC803 remote control provides full function control and utilizes infra-red light in the pipe for up to 150 meter (500 feet) control. For “over-the-top” setups, the remote utilizes radio communications up to a distance of 130 meter (430 feet).
Flexible power options provide 30 hours operating time with NiMH rechargeable batteries. Alkaline batteries can be used directly at the laser without a separate battery pack. An additional car charger is available for work in remote areas.
Large graphical user interface can be seen easily when the laser is in a manhole. All functions are available via graphical menu which makes it simple and easy to use – no secret button pressing and short learning curve means it can be handed to anyone in your crew with little or no training. The same graphical user interface is used at the RC803 remote control.
The Spectra Precision DG613G has advanced functions that make setting up and using it easier and more accurate:
Line-Set, check allows the laser to shoot the beam upwards to align to the next manhole from a short, deep trench as the beam will move up to 100% in seconds.
Line scan allows the beam to sweep quickly (left and right) and can be stopped on the target at the bulls-eye position using the remote control.
Line Alert is automatically activated once the grade and alignment are set –warning the user that the set-up has been disturbed, avoiding costly errors and re-work.
The DG613G has a bright beam that can be easily spotted in the pipe and enhanced with the patented target that bends the beam upwards making it easy to see when looking down at the pipe reducing the need to bend down to see the beam when in the trench or standing above the trench. Multiple attachments are available allowing the DG613G to be mounted in pipes of any size from 150mm (6 inch) upwards. A blower is also available to evenly circulate air through the pipe to avoid refraction of the beam inside the pipe.
Cody Corporation have a range of automatic levelling lasers and Optical Dumpy / auto levels as well as internal fit out lasers with cross lines and dot laser level. Cody's brands include Bear Scientific, Proshot and Spectra Precision and are sold Australia wide in all major citys including, Adelaide, Sydney, Melbourne, Perth, Brisbane, Hobart, Newcastle, Geelong, Darwin, Gold Coast, Central Coast, Bendigo, Wagga, Moorabbin, Braeside, Brooklyn, Granville, Toowoomba, Wollongong, Hoppers Crossing, Wingfield, Townsville, Horsham, Hamilton, Launceston, Fyshwick, Albury, Nerang and Cairns. Call us for closest location. Each laser level is checked for calibration before dispatch here in Australia.
Cody Corporation supplies lasers for sale through its extensive dealer network through out Australia, New Zealand and Papua New Guinea. If you are thinking about buying Red Back, CST, spot on, tanley, lufkin, bosch, topcon, sokkia, pls, imex, proshot, stabila, pentax, or any other brand check our lasers first for our quality, support, knowledge, back up, service and price, we believe we can provide you with the best levellig solution for your business.